Blog Post

Few Easy Steps To Replace Ink Cartridge In Your HP Officejet Pro 8600 

  • By Samantha Lee
  • 30 Dec, 2017

HP Printers are without any hesitation one of the most reliable printing peripherals, but no matter how easy the interface, a new user will always stumble in replacing their ink cartridge. It is a mixed feeling of excitement and nervousness. Remember how we used to wait for our pens’ refill to finish so that we can get a new one. It is the same kind of feeling! The difference is that with pens, we didn’t have much trouble in refilling and it was less messy, here you have to do some fine tricks. So, let’s get down to the business.

While, there are separate tailored ways to refill and replace but the rudimentary is the best and most effective. This process might be new for you but there is no denying of its effectiveness. So, if you are looking for a comprehensive way to replace it, HP Printer Support team suggests following the below mentioned steps:

  • Check If The Printing Device Is Turned On

In order to replace your ink cartridge/toner, turning on your printer will certainly be the first step!

  • Open The Compartment

This is a delicate step, be careful. Here you have to put your fingers into the slot located at the left of the printer. Now, drag the slot to get an access to the door of the cartridge compartment. Now that the compartment is open, the printer carriage will move to the left side of the printer.

  • Release The Toner For Replacement

When the printer carriage stops moving and becomes stable, push the front part of ink cartridge which you want to replace.

  • Take Out The Old One

Take out the old ink cartridge from its slot and hold the new cartridge carefully. Now align the new ink facing towards the printer.

  • Push The New Ink Box Into The Slot

After you have aligned it properly, push the new ink cartridge into the slot gently till you hear a clicking sound. Again, ensure that the colored dot on the package of the cartridge must match the dot shown in the slot.

  • Close the Compartments

Finally, the process of closing the door of the printer cartridge compartment, wait for the warm-up sequence to finish.

If there is any issue in the process or you have any other issues related to your printer or For Any Technical Help Contact HP Support New Zealand, contact our HP Printer Support Number @ 099509144. You can be rest assured about the quality of service we provide since we have certified engineers to finish the job.

By Samantha Lee 01 Feb, 2018
overclocking is the process to accelerate the performance of the component of the computer such as its processor to run at the higher rate than rated by the manufacturer. HP Support New Zealand has described How to Speed up HP Laptop’s Processor by Overclocking. To execute this task, you just have to follow some steps which are described in this blog.
Share by: